Part List:
A. Post Cap (1)
B. Rail Key (1)
C. Rider Clip Kit (2)
D. Rail End Cap (2)
E. Sign Clip Kit (2)
F. Post (1)
G. Anchor (1)
Installation Steps
Step 1
Use a hammer to drive the steel Anchor into ground, make sure that the anchor is straight while hammering. The anchor should be driven
downwards until the bottom the plate is flush with the ground. The bottom plate should be facing forward in the desired direction of real
estate post arm.
Step 2
Slide the vinyl real estate post over the anchor until it touches the ground. The hole in the the post should be at the top and facing in the desired direction of the sign arm.
Step 3
Use a screwdriver and attached screws to fix the rider clips on top of the post arm.
Step 4
Slide the vinyl rail into the post. Make sure that the rider clips are facing up. Slide the arm through the holes until the slots are aligned on the inside of the post.
Step 5
Slide the key into the slots of the real estate post arm until it locks in place. This will secure the arm.
Step 6
Slide the post cap onto the top of the real estate post. And slide the rail cap onto both side of the arm.
Step 7
Insert the sign clip screw through the arm, and then fix the screw.
Note: You need to choose the right hole on the arm to fit the size of your signs
You can also view our video on YouTube How to install a real estate sign post